Item Tag 10 psi

Senninger PRLV Pressure Regulators operate a little different than a standard pressure regulator. A Pressure Regulating Limit Valve (PRLV) is designed to control pressure even when there is no flow and can be used when a downstream shut-off valve is needed in your system design. The PRLV has a rubber seal at the seat of the T-stem flow path which closes to regulate downstream pressure to no more than 15 psi higher than the regulating pressure in the system, protecting the components from too high of static (no flow) pressure. We always recommend installing a filter prior to any pressure regulator installation. Not for drinking water, outdoor irrigation use only.Features:Operating Flow Range: 0.5 - 18 GPMMaintains a constant preset outlet pressure at various inlet pressures for optimal applicator operationLow hysteresis and friction lossSeveral regulating options available in either 3/4" or 1" FPT inlet/outlet sizePlease note directional flow arrow on body for proper installation*Please Note: The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 5 psi above the expected outlet pressure, but not exceeding the maximum inlet pressure.

Special note: This pressure regulator is not designed to operate under static (constant) pressure. It must be installed after any valves or timers to operate correctly. Using this item under static pressure will eventually weaken the internal spring and cause the regulator to fail. The low flow PRL pressure regulator is ideal for drip irrigation and solid set application which often have lower flow rates. Also can be used in pivot and mechanical move applications where a PRL is used at each applicator. This pressure regulator is a 3/4" FPT inlet X 3/4" FPT outlet. Please Note: The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 5 PSI above the expected outlet pressure, but not exceeding the maximum inlet pressure.Features:100% pressure tested, to ensure quality and performanceVery low hysteresis and friction lossesCan be installed above or below groundPatented tamper-proof designNo external metal parts for excellent corrosion resistance2 year warranty on materials, workmanship and performance