Item Tag: Tempo

Tempo Inline Dripper

Inline Drippers have two barbed connections and are designed for use with 1/4" micro tubing (.170" ID x .250" OD) to create a run of drippers by installing in-line and then plugging the end of the run with a 1/4" goof plug. The drip point is located in the flat disc center of the emitter. Creating a ring is also a great way to water trees or larger shrubs. Ideal for anywhere you want a consecutive run of drippers on one line of 1/4" micro tubing. Different flow rate emitters can be mixed in the same run to meet all your watering needs as long as you do not exceed the capacity (30 GPH) of the 1/4" micro-tubing. *Tubing in images is for display purpose only, not included with dripper. Features: Minimum Operating Pressure: 10 PSIMaximum Operating Pressure: 30 PSITurbulent flow path reduces cloggingFlow is either directionConstructed of UV resistant engineering grade plastic materialColor coded for easy flow rate identificationDischarge rates at various operating pressures:Nominal Flow RateMax # allowed in Single Run*15 PSI20 PSI30 PSI0.5 GPH300.60 GPH0.70 GPH0.90 GPH1.0 GPH150.90 GPH1.05 GPH1.35 GPH2.0 GPH101.40 GPH1.60 GPH2.10 GPH*Based on average of 12″ spacing between emitters.

Tempo Compression Tubing x FHT Tee Adapter

Garden Hose Threads (GHT, FHT, MHT) are unique in that they make the water-tight seal with a flexible washer between the two connection pieces. Thread seal tape is not recommended since it can inhibit the full threading together of the pieces, thus not allowing a tight leak-proof seal. GHT are not compatible with NPT or IPT/IPS fittings commonly found in iron pipe or PVC water systems. This 3/4" FHT (Female Hose Thread) Swivel Tee compression fitting with black inserts is compatible with our 1/2" poly tubing with .700" outside diameter. The FHT swivel connection easily attaches to your outdoor spigot or garden hose to run our 1/2" (.700" OD) poly tubing in two directions from one connection.Often used by irrigation contractors, compression fittings are very economical and do not require clamps or gluing. Because of this, the fittings can be more difficult to install and are not removable/reusable. Compression fittings install over the poly tubing and are size specific for your tubing outside diameter.

Tempo 4 Zone Drip Head

Conveniently water multiple plants from a single 1/2" male threaded riser in your landscape beds with these four outlet PC drip emitters. Available in various flow rates. These pressure compensating (PC) emitters will evenly distribute water from each outlet over a pressure range of 20 - 60 PSI. Color coded for easy flow rate identification. Constructed from UV resistant plastic with a silicon diaphragm and a built in filter to help reduce clogging.Attach 1/4" (0.160" to 0.170" ID tubing) micro-tubing to water directly at the plants. Top mounted barbed elbow outlets rotate for easy access in landscape applications. Available in four different flow rates. Does not include outlet caps.

Tempo Tefen 1/8″ MPT Misters

These Tefen misters on 1/8" MPT (male pipe thread) are complete with 100 mesh stainless steel screen filters. The Tefen misters are designed to thread directly into PVC fittings with 1/8" FPT threads.Features:Cone Angle 80° and 120°Droplets in 30 to 80 micron rangeApproximate flow at specified operating pressure:Mister30 PSI45 PSI60 PSI75 PSIAngle0.6 GPH0.65 GPH0.80 GPH0.90 GPH1.00 GPH80°1.0 GPH0.90 GPH1.10 GPH1.30 GPH1.40 GPH80°1.5 GPH1.60 GPH1.90 GPH2.36 GPH2.70 GPH120°