Item Tag: Standard

Drip Depot Economy PC Button Dripper with Nipple Outlet

Economical Pressure compensating Button Dripper with the nipple outlet for adding a two or four way dripper manifold assembly. Turbulent flow path and self-flushing to reduce clogging issues. Pressure compensating drippers offer high uniformity over longer runs and undulating terrain. Pair with Drip Depot Economy Arrow Drip Assemblies, see link below in accessories.Features:Several Flow Rate Options: .5 GPH (2L/h); 1 GPH (4L/h); 2 GPH (8L/h)Operating Pressure Range: 7 - 60 PSI (.5 - 4 Bar)Recommended Filtration: 120 mesh minimumEasy installation into 1/4" micro-tubing or on 1/2" or larger PE Tubing

Tempo Inline Dripper

Inline Drippers have two barbed connections and are designed for use with 1/4" micro tubing (.170" ID x .250" OD) to create a run of drippers by installing in-line and then plugging the end of the run with a 1/4" goof plug. The drip point is located in the flat disc center of the emitter. Creating a ring is also a great way to water trees or larger shrubs. Ideal for anywhere you want a consecutive run of drippers on one line of 1/4" micro tubing. Different flow rate emitters can be mixed in the same run to meet all your watering needs as long as you do not exceed the capacity (30 GPH) of the 1/4" micro-tubing. *Tubing in images is for display purpose only, not included with dripper. Features: Minimum Operating Pressure: 10 PSIMaximum Operating Pressure: 30 PSITurbulent flow path reduces cloggingFlow is either directionConstructed of UV resistant engineering grade plastic materialColor coded for easy flow rate identificationDischarge rates at various operating pressures:Nominal Flow RateMax # allowed in Single Run*15 PSI20 PSI30 PSI0.5 GPH300.60 GPH0.70 GPH0.90 GPH1.0 GPH150.90 GPH1.05 GPH1.35 GPH2.0 GPH101.40 GPH1.60 GPH2.10 GPH*Based on average of 12″ spacing between emitters.

Drip Depot Electric Switch Valve

Electric Switch ValveAn electric switch valve designed for automated control of fluid flow in industrial and commercial systems. The valve uses an electric actuator to open or close the flow path, allowing remote or automated operation without manual intervention. Suitable for installations requiring reliable on/off flow control.Features:Electrically actuated valve for automated flow controlCompatible with standard NPT and flange connectionsDurable construction for industrial and commercial applicationsAvailable Sizes:NPT: 1.5", 2", 3"Flange: 3", 4", 5", 6"

Drip Depot Brass 3/4″ MHT x MHT

Garden Hose Threads (GHT, FHT, MHT) are unique in that they make the water-tight seal with a flexible washer between the two connection pieces. Thread seal tape is not recommended since it can inhibit the full threading together of the pieces, thus not allowing a tight leak-proof seal. GHT are not compatible with NPT or IPT/IPS fittings commonly found in iron pipe or PVC water systems. Brass 3/4" MHT x MHT CouplingThis quality brass coupler converts a female hose thread connection to a male hose thread connection. Item is used to join female hose thread items together. Item is non swivel male hose threads on both ends. *Please note: Brass contains trace amounts of lead, so please consider your planned use before purchase.

K-Rain ProSeries 100 Female Fitting Valve

The straight-through flow pattern reduces the risk of trapped debris causing leaks or failure and reduces pressure loss. Valves have both an internal bleed through the solenoid and external bleed screw for manual operation.

Irritec Perma-Loc Tubing x Female Pipe Thread Swivel Adapter

About Drip Depot Perma-Loc Drip Irrigation Fittings:Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The tubing connectors can be used on blank tubing as well as drip line.To Use: Simply twist the locking collar back towards the center of the fitting exposing the barb. Then push tubing or tape over barbed end. Next, hand-tighten locking nut over tubing or tape for a permanent secure fit.To Remove: Just loosen locking nut, pull tube off and re-use as needed.Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is not removed from the fitting. This Perma-Loc tubing x female pipe thread (FPT) swivel adapter is used to connect our 1/2" (.600" ID x .700" OD) polyethylene tubing to a 3/4" male pipe thread (MPT) connection. The 3/4" female pipe thread connection swivels for easy installation. Please Note: This item is not compatible with standard garden hose threads. Please see item #1193 for connection with 3/4" garden hose threads. Irritec Perma-Loc Hose Connector Tubing Compatibility ChartDrip Depot Nominal SizeIrritec Nominal SizeIrritec Series NumberPE Tubing Acceptable ID RangePE Tubing Acceptable Wall Thickness3/816mm500.510" - .580"12.9-014.7 mm.035" - .055".89 -1.40 mm1/218mm600.590" - .630"15.0 - 16.0 mm.025" - .050"1.00 1.40 mm3/43/4800.790" - .845"20 - 21.5 mm.045" - .065"1.14- 1.65 mm1110001.025" - 1.085"26 - 27.6 mm.045" - .065"1.65 - 1.91 mm

Drip Depot Brass PEX-B Barb x Female Sweat Adapter

Brass PEX-B Barb x Female Sweat Adapter - Lead FreeLead-free brass adapter designed for secure transitions between PEX-B piping and copper SWT connections. Constructed from dezincification-resistant (DZR) lead-free brass for superior corrosion resistance and long service life in potable water and HVAC applications. Certified to NSF/ANSI 61 and ASTM F1807 standards for compliant use in drinking water systems. Compatible with standard PEX-B crimp ring and stainless steel clamp connection methods. Rated to withstand hot and cold water distribution conditions typical in residential and commercial plumbing. Ideal for professional plumbers and DIY installers seeking a reliable, code-compliant PEX-to-copper transition fitting.

Drip Depot Brass PEX-B Barb x Female Sweat Elbow

Brass PEX-B Barb x Female Sweat Elbow - Lead FreeDesigned for durable, code-compliant transitions between PEX-B tubing and copper SWT connections. Manufactured from lead-free brass compliant with UPC standards, it is suitable for residential and commercial water distribution systems. This fitting is compatible with PEX-B tubing and ASTM F1807 crimp or clamp systems using copper crimp rings or stainless steel clamp rings. The Female SWT allows secure soldered connections to a copper pipe. Brass construction provides corrosion resistance, strength, and long-term reliability in hot and cold water applications.

Hydro-Rain 1/2″ Drip-lock to 3/4″ Female GHT

Garden Hose Threads (GHT, FHT, MHT) are unique in that they make the water-tight seal with a flexible washer between the two connection pieces. Thread seal tape is not recommended since it can inhibit the full threading together of the pieces, thus not allowing a tight leak-proof seal. GHT are not compatible with NPT or IPT/IPS fittings commonly found in iron pipe or PVC water systems. Hydro-Rain 1/2" Drip-lock x 3/4" FHT is used to attach your 1/2" tubing to any standard garden hose or outdoor faucet connection. HydroRain has made drip irrigation even faster and easier with the Drip-Lock removable/reusable fittings for low pressure 1/2" poly tubing with .630" - .710 (16 - 18 mm) outside diameter tubing. The oversized seal and durable gripping teeth will hold almost any brand of half inch poly tubing and dripline.Drip-Lock Features:Fittings are releasable and reusable with the Drip-Lock release collarPatented design requires no glue or tools for installationLow insertion force makes installation quick and easyDrip-Lock technology ensures lower friction loss for better water efficiencyBuilt tough fittings made from UV-resistant ABS, stainless steel and EPDM sealsDrip-Lock Specifications:Burst pressure exceeds 100 PSIOperating pressure: 0-50 PSI

Secret Link