Garden Hose Threads (GHT, FHT, MHT) are unique in that they make the water-tight seal with a flexible washer between the two connection pieces. Thread seal tape is not recommended since it can inhibit the full threading together of the pieces, thus not allowing a tight leak-proof seal. GHT are not compatible with NPT or IPT/IPS fittings commonly found in iron pipe or PVC water systems. The Perma-Loc hose thread swivel adapter is used to connect polyethylene tubing of various sizes to a standard 3/4" male garden hose thread connection such as an outdoor spigot or garden hose. The female hose thread connection swivels for ease of installation. About Drip Depot Perma-Loc Drip Irrigation Fittings:Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The tubing connectors can be used on blank tubing as well as drip line.To Use: Simply twist the locking collar back towards the center of the fitting exposing the barb. Then push tubing or tape over barbed end. Next, hand-tighten locking nut over tubing or tape for a permanent secure fit.To Remove: Just loosen locking nut, pull tube off and re-use as needed.Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is not removed from the fitting. Perma-Loc SeriesNominal SizeAcceptable Inside Tubing DiameterAcceptable Wall Thickness5003/8".510" to .580".035" to .055"6001/2".590" to .630".025" to .050"8003/4".790" to .845".045" to .065"10001"1.025" to 1.085".045" to .070"
