Item Tag: Drip Tubing

ORBIT 3-in-1 Drip-Lock 5/8-in Hose Faucet Adapter to 1/2 in Tubing 67738

Drip made simple - The 3-in-1 Hose Faucet Adapter brings simplicity to Drip Irrigation. 3 features in 1 adapter- The Orbit 3-in-1 adapter contains a pressure regulator, faucet to 1/2" tubing adapter and a filter, all in a small compact product. Drip irrigation compatibility - Attaches 1/2" drip tubing to a Hose/Faucet - (.690, .700 and .710 O.D.). Regulates water pressure to 20 PSI. Easy-to-clean filter screen • Orbit Irrigation Products 117573881 67738 3-in-1 Drip-Lock Faucel Adapter

25-PACK 1/2″ Barb Drip Tubing Adapter TEE Threaded Fitting 3/4″ Tee x 17mm .600

25-PACK 1/2" Barb Drip Tubing Adapter TEE Threaded Fitting 1/2" Tee x 17mm .600 with 3/4" Male NPT adapter 25-PACK - 1/2" Drip Tubing Adapter TEE Threaded Fitting 3/4" MNPT (1/2" Tee x 17mm .600 ID Insert Connector) Connects / Adapts 17mm drip tubing to 3/4" MNPT Thread PipeSpecial, extra sharp barb design for secure and easy installation without glue or clampsFits brown PC drip line and polyethylene drip tubing with .600 ID x .700 ODMade of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditionsOne-piece construction 16 and 17 mm (1/2") Barbed Fittings The brown 1/2” Barbed Drip Fittings are used in the installation of DIG’s brown PC™ drip line with 18" spacing and with .600 ID x .700 OD drip tubing. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic, and are available in a variety of configurations. Using a double barb, two pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit. Features Special, extra sharp barb design for secure and easy installation without glue or clamps Fits DIG’s brown PC drip line and polyethylene drip tubing with .600 ID x .700 OD One-piece construction Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions Available in a variety of configurations Products specifications Operating pressure: up to 30 PSI Color: brown Use with 1/2" drip tubing or drip line with .550 ID to .600 ID Material: Acetal Brown 1/2" (17 mm) Barbed Drip Fittings are available in a range of configurations for 1/2" drip line or drip tubing with .600 ID (17 mm); they provide a simple, low cost installation method. Using the double barbed fittings, drip line or drip tubing is pushed over the barbs for a very tight fit. To use the barbed fittings with drip tubing or drip line, force the drip line or drip tubing over the barbed side of the connector, tee, or elbow. 📦 Brand New🚛 FREE & FAST Shipping with valid tracking number🔒 Secure, verified payments🛒To purchase, click the "BUY NOW" Button5 ⭐ Service

Drip 1/2 In. Barb Fitting Insertion Tool

Using half-the-effort of hands alone, this handy fitting insertion tool will make fast work of even the largest Drip system installations. Provides the fastest and easiest connection of barbed fittings to 1/2" Drip tubing.

016010T Tubo De Suministro De Riego Por Goteo De 1/4 De Pulgada, 100 Pies, P…

Mercados › Piezas Del Sistema De Riego9999999 999123 016010T › 016010T Tubo de suministro de riego por goteo de 1/4 de pulgada, 100 pies, para riego por goteo 016010T Tubo de suministro de riego por goteo de 1/4 de pulgada, 100 pies, para riego por goteo Comprar Ahora TUBO DE IRRIGACIÓN DE 1/4 DE PULGADA: cree una línea de alimentación que suministre agua a un dispositivo de riego por goteo de bajo flujo, o utilícela como línea principal en un pequeño sistema de riego por goteo; para árboles, arbustos, macizos de flores y másCONECTE A LAS PIEZAS DE RIEGO POR GOTEO: conecte a la línea de suministro principal con un micro conector de 1/4", conecte el otro extremo directamente al emisor para suministrar agua a la planta; funciona con compatibles piezas de tipo irrigaciónFÁCIL DE USAR: Como parte de un sistema completo de irrigación por goteo, la tubería de suministro transporta agua al área a regar; la bobina de la tubería viene envuelta en plástico retráctil para mayor comodidad; fácil acceso según sea necesarioCONSTRUIDO PARA DURABILIDAD: La capa exterior, que está expuesta al sol, y la capa interior, que está expuesta al agua, están hechas de contenido 100% virgen; la capa intermedia está compuesta de contenido recicladoESPECIFICACIONES: Viene con una bobina de 100 pies de tubo de suministro de polietileno de pulg.; el diámetro exterior (OD) del tubo es de 0,250 pulg., el diámetro interno (ID) es de 0,170 pulg. 100050211 Negro 016010T Tubo de 1/4 de pulgada por 100 pies, 1 Envío Ofrecemos envío rápido GRATUITO en todos los pedidos! Enviamos dentro de 1 día de pago, incluyendo sábado y domingo. La mayoría de los artículos se entregan en 2 o 3 días. Devoluciones Aceptamos devoluciones de los artículos dentro de los 30 días de la recepción del artículo. Cualquier producto devuelto debe estar en las mismas condiciones en que se recibió. Contáctanos La satisfacción del cliente es muy importante para nosotros. Si tiene algún problema con su pedido contáctenos y haremos nuestro mejor esfuerzo para que se sienta satisfecho. Siempre respondemos dentro de las 24-48 horas. Por favor, visite nuestra tienda eBay para ver otros Piezas Del Sistema De Riego9999999 999123 016010T artículos en venta. Gracias por comprar en nuestra tienda!

Tempo Compression Tubing x FHT Tee Adapter

Garden Hose Threads (GHT, FHT, MHT) are unique in that they make the water-tight seal with a flexible washer between the two connection pieces. Thread seal tape is not recommended since it can inhibit the full threading together of the pieces, thus not allowing a tight leak-proof seal. GHT are not compatible with NPT or IPT/IPS fittings commonly found in iron pipe or PVC water systems. This 3/4" FHT (Female Hose Thread) Swivel Tee compression fitting with black inserts is compatible with our 1/2" poly tubing with .700" outside diameter. The FHT swivel connection easily attaches to your outdoor spigot or garden hose to run our 1/2" (.700" OD) poly tubing in two directions from one connection.Often used by irrigation contractors, compression fittings are very economical and do not require clamps or gluing. Because of this, the fittings can be more difficult to install and are not removable/reusable. Compression fittings install over the poly tubing and are size specific for your tubing outside diameter.

Secret Link